Видео

I can't believe you're using my tire break down method with sizzer jack attached to vehicle! Be careful! Ive got patent pending! Hahaha! I'm having trouble with 88' GW ignition key switch not working at on position except lower dash lights a fuel pump functioning? I'm going through all electrical connections now! Have you had this problem with switches not functioning an no engine start, no headlight?

How does the ride compare to the S10? Ive been looking at these bike for some time...S10 or royal star, primarily road cruising bike.

Thank You so mutch. 👍

Thank the Lord you aight bruh they do not pay attention at all thats why when i see oncoming traffic on my bussa i be flashing the lights with that pass button

Just what I needed, ordered a new Wilbers shock and springs/oil for the front a while back because I could feel the suspension was end of life. Today the rear shock gave up the ghost, had a proper bouncy ride home. Luckily the shock and springs are already in the mail, hopefully the Gen3 won't be too different from this and it'll be a quick fix :)

What is the extra tube on the bottom with the grey cover

How deep do you have to drill? Or is it literally just opening the holes?

what did u pay 4 it??? loking at the same bike

Do you still have your bike?

Remove the ABS-Sensor at first.....makes the life much easyer..... Greetings from a veeery happyFJR owner 🙃

What stupid idiot driver I had one flock me off and honk repeatedly aggressively for simply going around them

Bes sounding flat 6 I've heard so far

Sounds excellent! What model did you buy (pipes), their website only shows up to 1000cc.

What the fuck is that intersection???

Slowing down for that crappy intersection. Smart move rider.

Does it fit on a ninja 650 2024?

You should be the one to pay attention 😂😂 LMAO

did you balance the rear tire

Fuvk man 😢 Im scared after watching this

There was a police chase going on in the background

Hi, I am planning to do the same thing, but I think you can skip some struggle by simply removing the wheel fender and the tubes of the fork from triple clamp. Also, to install the bottom race you can invent some sort of press with a long big screw and sockets at the end, tighten a pulley on that screw will pull the bearings in? I also preffer wacking them but underneed there is a bit scary. At least your wobble without hands at low speed was gone after this? Thanks for video! I do the same and my "shop" looks the same. :D Edit:... a long screw with a big pulley at the end is the actual axle of the fork> :D

That's why I love my old fjr,I do that to Harley's all the time and it never gets old.

Hey where can I find those pipes?

14r is a 🐖 of a bike....

goddam that was fun, i need a cardo. And my helmet looks way too goofy

Excelente video, gracias por compartir ayuda mucho a los que no lo han hecho

Here are the torque specs: Front Wheel: Axle = 52 ft-lbs Two Pinch bolts = 15 ft-lbs (The inside pinch bolt is tightened first) Front brake caliper to forks = 29 ft-lbs Front speed sensor front brake hose holder bolt = 5.1 ft-lbs Rear Wheel: Axle Nut (27 mm)= 90 ft-lbs Pinch bolt = 18 ft-lbs Brake torque rod = 22 ft-lbs Speed sensor = 5.2 ft-lbs Hope that helps...

Everything what you could you're have made wrong 😂

I got a 2007 Tmax 500 a few months ago as my first bike, I really like it. Just pull the throttle and go, I thought this would be good for learning until I get the balance and all that. I'll use it to pass my test and maybe get something different as it's not physically in the best shape due to it's age and heavy use and 50,000 miles but it's fine for learning and it's got more than enough power. Maxi scooters are not that popular here in Ireland sadly so it's hard to find a good one with low miles for a decent price.

The camera was not showing how you screwed in the bolt, camera was too high.

I don't even think it's that. A lot of times things like this are done on purpose bc they assume you're a pos. Usually sport bikes are seen doing 120 weaving traffic.

Do you still have this Pack Mule? How do those pipe sound now with 2 years of season on them? I wish I could hear them on a Road test, Only Harley Guys do drive by road test someone needs to catch on out there with Jap bikes and do the same when they put pipes on their Scooters. Thx for the vid it was fun to watch

Thank you for the video. I do have a few questions. I see you just filled and capped your forks. Did you have any concerns about any air getting inside when you were filling it back up? I see some people have pumped the forks to “get the air out”. Do you know if you have the stock springs or not?

I though I saw you leaving. Missed you by a minute. ))

I drive my zx14 like noone can see, me and they are all drunk..

I like the video but there really wasn’t much of an explanation on how you did it. Do you have a full length video of the install?

Hi! Why did Avior place a piece of wood underneath the rear tire, thank you for your reply?

Thats a sweet car.

Hi! finally did you reassemble the bolt (ABS side) on the same side or what? Thank you!

Hey where’s all the other videos you mentioned was looking forward to them I have the same bike and have enjoyed following you

And that my friends is the man we should all respect as He's not immediately painting the bike or putting different exhaust but deals with issues that have to be addressed first. 👍 Cheers from 2001 FJR rider.

😮😅

Lets do a fjr1300 vs gl1500 drag race

What camera are you using?

NO WIND PROTECTION FOR YOU! 😁

Great video, wonderful bike

I had a 08 ZX14. Ride safe brother!!! 🫡

AWESOME BIKE AMAZING VIDEO FANTASTIC ! ! ! !

Holy sht fuck that guy thank god you're safe brotha

Nice job!! Many thanks for showing and sharing!